All the following is free to collector or pay me post and packing. First come first served, take 1 item or the lot. I would prefer it goes to a good home rather than scrap it, which is where the left overs will go! Ask for pictures of individual items or a quote on postage.

1 x V8 SU carb setup complete (2 x carbs) part dismantled, complete with solid pipes and fuel flow sensor? electronic chock.
1 x 3 bolt hole pulley (not sure what it's for).
1 x engine lift point
4 x LH front indicator complete assemblies
3 x RH front indicator complete assemblies
1 x LH front indicatot lens
2 x RH front indicator lenses
1 x V8 air intake valve, hot or cold supply
1 x front and 1 x rear head rest metal trim peices
2 x side indicator unit
6 x central door lock motors (3 with mounting brackets, 1 with wires cut)
1 x central consoul trim with coin holder and 1 x air vent
1 x sunroof motor
1 x spare sunroof manual handle
1 x fuel flow sensor (wires broken)
2 x rear wiper motors
2 x rear? road springs standard?
2 x front door LH & RH external door handles, sprayed yellow but may be good for parts complete with locks but no key
2 x V8 air intake alloy elbows
1 x wiper arm
1 x V8 air filter housing
4 x beige plastic front seat trim bits
1 x air intake off exhaust manifold with plate
1 x throttle position sensor???????
1 x DRC2646
1 x series 1 ash tray cover
2 x series 1 heater knobs?
1 x series 2 speedo with rev counter
2 x hand brake grips
1 x series 1 instrument cluster end cover
2 x front bumper brackets
1 x seat being sat in sensor
1 front and rear bumpers, sprayed yellow with black metal trim!!!!! Trim peice T-screws may be worth having??
Lots of series 2 switches, buttons, sensors, electrical boxes, relays etc.

I am based in High Wycombe if you want to collect, reply to the post or send me a PM if you want something. I will do the same thing on E-bay soon to clear it all.

Cheers

Dan

Hi there,

Im interested in the bits your giving away! Im only in Oxford, and will come and pick it all up!

I am mainly after "generic" series 2 bits, for my 2000, but I will take more to get it out of your way (I may get a 3500 at some point!)

Many Thanks

Richard

If available I could certainly use a throttle position sensor and a front passenger central locking unit - both are acting up on my car.

Anthony

Anthony,

Sorry but all the bits have gone. Richard (rjessett) has kindly taken them off my hands clearing some much valued garage space.

Cheers

Dan.

No probs, thanks for letting me know

Once again - thanks for all the parts Smiffy

Punx0r,

I need to sort though the bits when I get a chance - you can have those two bits on one condition - you tell me what im looking for! . Central door motor should not be a problem - but there might be slight variations to the one you want - same with the sensor -

Maybe a picture might help! - saying that, if your local, you can come and find them out yourself....

Rich

Hi Rich, that's very kind of you

I'll take a photo of the throttle pot (probably have to wait till the weekend for some daylight...) and see if there's a decent enough picture in the haynes of the lock whatsit.

I'm near Northampton so I'll pay the post if that's ok

Throttle pot:



Door lock unit:



So if you happen to come across either of these I'd be most interested

Anthony

HI - sorry for the late reply - I have not forgotten - I have started to sort out the bits, but im afraid I have not found these yet!

Seem to be really busy at the moment, haveing to rebuild a 1.4v corsa after a cambelt snap have taken my free-time! 16 valves bent...

No problem at all mate, if this car gets finished in under 5 years I'd be surprised